TA Triumph-Adler P-C4580DN - Manual (Page 134)

Operation Panel
6-10
3
Press [OK]. The Collate screen appears.
4
Press  or  to select whether Collate mode is enabled.
5
Press [OK].
The selected mode is set and you return to the function menu.
Offset (Offset Setting)
Set whether each set of printed output is offset from the previous set.
1
In the Copies menu or the Paper Selection menu, press
[Function] ([Right Select]). The Function menu appears.
2
Press  or  to select Offset.
3
Press [OK]. The Offset screen appears.
4
Press  or  to select whether Offset mode is enabled.
5
Press [OK].
T
he selected mode is set and you return to the function menu.
Duplex (Setting the duplex printing)
Set duplex printing. For details, refer to Duplex (Setting the duplex printing) on page 6-30.
1
In the Copies menu or the Paper Selection menu, press
[Function] ([Right Select]). The Function menu appears.
2
Press
 or  to select Duplex.
Collate:
a b
1 Off
********************-
2
*On
Function:
a b
********************-
2 Collate
3 Offset 1 Paper Output
Offset:
a b
1 Off
********************-
2
*On
Function:
a b
********************-
2 Collate
3 Offset 1 Paper Output