TA Triumph-Adler P-C4580DN - Manual (Page 81)

3-11
Printing
4
Open the paper width guides on the multi purpose tray to the
maximum width.
Make sure that the banner tray is attached so that the paper width
guides on the banner tray are outside the paper width guides on the
multi purpose tray.
5
Load banner paper so that it passes under the paper clamp bar.
6
Loop the banner paper back and place the end on the paper support.
7
Adjust the paper width guides to the width of the paper.
IMPORTANT If there is a gap between the paper and the paper width
guides, readjust the guides to fit the paper in order to prevent skewed
feeding and paper jams.