TA Triumph-Adler P-C4580DN - Manual (Page 218)

Operation Panel
6-94
Data Security (Data Security setting)
This is to change the Security Password, perform HDD initialization and perform data sanitization.
• HDD Initializ. (Hard Disk Initialization)...6-94
• DataSanitization (Sanitizing the stored data)...6-97
1
In the Security menu, press  or  to select Data Security.
2
Press [OK]. The Data Security menu screen appears.
HDD Initializ. (Hard Disk Initialization)
This is to change the Security Password and initialize on HDD.
• Data Overwrite (data overwrite setting)...6-95
• SecurityPassword (Change the Security Password)...6-95
• Initialization (Initialize on HDD)...6-96
1
In the Data Security menu, press  or  to select HDD
Initializ. .
2
Press [OK]. The SecurityPassword input menu screen appears.
3
Enter the Security Password using the numeric keys.
4
Press [OK]. If the Security Password entered is correct, the HDD
Initializ. menu screen appears. If the Security Password
entered was not correct, Incorrect password is displayed and
the SecurityPassword screen reappears. Enter the correct Security
Password.
Note HDD Initializ. is displayed only when the optional Data Security Kit is installed on the printer.
Data Security:
a b
********************-
2 DataSanitization
[ Exit ]
1 HDD Initializ.
Note The HDD Initializ. menu is used with the optional Data Security Kit (E). For details, refer to Data
Security Kit (E) Operation Guide.
Note The initial setting for the Security Password is
"000000". For details on entering characters, refer to
Character Entry Method on page A-6.
SecurityPassword: a
b
* S
ABC
[ Text ]
HDD Initializ.:
a b
********************-
2 Security Passwd
3 Initialization
[ Exit ]
1 Data Overwrite