TA Triumph-Adler P-C4580DN - Manual (Page 200)

Operation Panel
6-76
Job Skip Timer (Job Skip Timer setting)
When Error Job Skip is set to "On", you can set the wait time until an error job is skipped. The default setting is 30 seconds.
1
In the Timer Setting menu, press  or  to select Job Skip Timer.
2
Press [OK]. The Job Skip Timer screen appears.
3
Use the numeric keys to set the job skip time.
4
Press [OK]. The job skip time setting is stored and the Timer Setting
menu reappears.
FormFeed TimeOut (Automatic form feed timeout setting)
If the printer receives no data for a set period, it times out and releases the current interface. It then prints whatever data it
has in its buffer and feeds out the printed page. The default setting is 30 seconds.
1
In the Timer Setting menu, press  or  to select FormFeed
TimeOut .
2
Press [OK]. The FormFeed TimeOut screen appears.
3
Use the numeric keys to set the form feed timeout delay.
4
Press [OK]. The form feed timeout setting is stored and the Timer
Setting menu reappears.
Job Skip Timer:
a b
(1 - 90)
/*30-sec.
FormFeed TimeOut: a
b
(5 - 495)
/30-sec.