TA Triumph-Adler P-C4580DN - Manual (Page 162)

Operation Panel
6-38
TIFF/JPEG Size (Adjusting the TIFF/JPEG file print out size)
Use this setting to select the printing method used when TIFF or JPEG files are printed directly.
1
In the Page Setting menu, press  or  to select TIFF/JPEG Size.
2
Press [OK]. The TIFF/JPEG Size screen appears.
The options available in TIFF/JPEG Size are as follows:
• Paper Size (default)
Images are resized so that they fill the paper size
when printed.
• Image Resolution
Image files are printed at the resolution specified in
the resolution information. Images with no
resolution information are printed using the Paper
Size setting.
• Print Resolution
Images are printed using a 1-to-1 correspondence
between the image file pixels and printed dots. For
example, the printed size of a 600 x 300-pixel
image file is 1 inch x 1/2 inch.
3
Press
 or  to select whether TIFF/JPEG Size mode is enabled.
4
Press [OK]. The TIFF/JPEG Size setting is set and the Page Setting
menu reappears.
Offset 1PageDoc. (Offset One Page Documents)
Set whether one-page documents are sorted.
1
In the Print Settings menu, press  or  to select Offset
1PageDoc. .
2
Press [OK]. The Offset 1PageDoc. screen appears.
3
Press  or  to select On or Off.
4
Press [OK]. The Offset 1PageDoc. setting is set and the Print
Settings menu reappears.
Note Images are automatically rotated during printing to
provide a closer match between the aspect ratios of the
image file and the paper used for printing.
TIFF/JPEG Size:
a b
********************-
2 Image Resolution
3 Print Resolution 1
*Paper Size
Note This setting is displayed when an optional 1,000-sheet finisher or 4,000-sheet finisher is installed.
Item Description
Off Does not sort one-page documents.
On Sorts one-page documents.
Offset 1PageDoc.: a
b
********************-
1 On 1
*Off