TA Triumph-Adler P-C4580DN - Manual (Page 58)

Preparation before Use
2-34
MP Tray Set. (MP tray settings)
To print correctly on paper supplied from the MP tray, use the procedure below to set the paper size and media type.
Paper Size (Paper size setting for MP tray)
You can use this to set the paper size that can be supplied from the MP tray. The default setting is Letter size for the U.S.
and Canada and A4 for other countries.
For more information about the paper sizes that you can feed from the MP tray, refer to Basic Paper Specifications on page A-10.
1
In the Paper Settings menu, press  or  to select MP Tray Set..
2
Press [OK]. The MP Tray Set. menu screen appears.
3
Press  or  to select Paper Size.
4
Press [OK]. The Paper Size screen appears listing the paper sizes
that can be supplied from the MP tray.
The available paper sizes are as follows:
5
Press
 or  to select the desired paper size.
6
Press [OK]. The paper size for the MP tray is set and the Paper
Settings menu screen reappears.
Note Feeding the paper having a paper size which does not match the current paper size from the MP tray can
cause paper jam.
When the paper size and/or paper type is set in the driver, the driver settings are given priority.
MP Tray Set.:
a b
********************-
2 Media Type
[ Exit ]
1 Paper Size
Paper Size:
a b
********************-
2 Auto(Inch)
3 Envelope Monarch 1 *Auto(Metric)
Auto(Metric)
Auto(Inch)
Envelope Monarch
Envelope #10
Envelope DL
Envelope C5
Executive
Letter-R
Letter
Legal
A4-R
A4
B5-R
B5
A3
B4
Ledger
A5
A6
B6
Envelope #9
Envelope #6
ISO B5
Custom
Envelope C4
Hagaki
Oufuku Hagaki
Oficio II
216x340mm
12x18"
8K
16K-R
16K
Statement
Folio
Youkei 2
Youkei 4
Note To have the paper size automatically selected from metric
sizes or inch sizes, select Auto (Metric) or Auto (Inch).