TA Triumph-Adler P-C4580DN - Manual (Page 226)

Operation Panel
6-102
Domain Name (Entering of Domain Name)
Enter the Domain Name for the authentication server.
1
In the Netwk Auth. Set menu, press  or  to select Domain
Name .
2
Press [OK]. The Domain Name screen appears.
3
Enter the Domain Name using the numeric keys.
4
Press [OK]. Register the Domain Name and the Netwk Auth. Set
menu reappears.
Local User List
User information registered in the machine can be viewed and changed.
In the local user list for the machine, 1 user with administrator authority and 1 user with device administrator authority are
registered.
Each user's properties are:
Use the procedure below to change the details registered.
1
In the User Login Set. menu, press  or  to select Local User List.
2
Press [OK]. The Local User List screen appears.
Note This setting is only displayed when NTLM or Kerberos has been set as the Server Type (Server type
selection) on page 6-101.
Note Up to 256 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-6.
Domain Name:
a b
*
ABC
[ Text ]
Machine Administrator Administrator
User Name: DeviceAdmin User Name: Admin
Login User Name: P-C4580DN: 4500
P-C5580DN: 5500 Login User Name: Admin
Login Password: P-C4580DN: 4500
P-C5580DN: 5500 Login Password: Admin
Access Level: Machine Administrator Access Level: Administrator
Note Log in as DeviceAdmin to change the administrator information. When logged in as Admin., it is only possible
to check the administrator information.
Local User List:
a b
********************-
l
DeviceAdmin
l Admin