TA Triumph-Adler P-C4580DN - Manual (Page 336)

Appendix
A-10
Basic Paper Specifications
This machine is designed to print on standard copy paper as used in regular ('dry') copiers and page printers such as laser
printers. It also supports a variety of other types of paper that conform to the specifications given in this appendix.
Be careful when choosing paper. Paper unsuitable for the machine may cause jams or may be wrinkled.
Supported Paper
Use standard copy paper for regular copiers or laser printers. The printing quality will be affected by the quality of paper.
Poor quality paper may result in unsatisfactory output.
Basic Paper Specifications
The following table lists the specifications of paper that is supported with this machine. Refer to the subsequent sections for
further details.
We are not responsible for the problems occurred from the use of paper that does not conform to our specifications.
Choosing the Appropriate Paper
This section describes guidelines for choosing paper.
Condition
Avoid using paper with bent corners or that is curled, dirty, or torn. Do not use paper that has a rough surface or paper fiber
lint, or that is especially delicate. Use of paper in any of these conditions will not only deliver poor copies but may also cause
jams and shorten the useful life of the machine. Choose paper with a smooth and even surface; however, avoid coated paper
or paper with a treated surface as it may damage the drum or fusing unit.
Ingredients
Do not use paper such as paper that has been coated or surface-treated or paper that contains plastic or carbon. Those
types of paper may produce harmful fumes from the heat of printing and may damage the drum.
Be sure to use the standard paper that contains at least 80% pulp, i.e., not more than 20% of the total paper content consists
of cotton or other fibers.
Criteria Specifications
Weight Cassettes: 60 to 256 g/m
2
Multi purpose tray: 60 to 300 g/m
2
Thickness 0.086 to 0.110 mm
Dimensional accuracy ±0.7 mm
Squareness of corners 90° ±0.2°
Moisture content 4 to 6%
Pulp content 80% or more
Note Some recycled paper does not meet requirements for use with this machine as listed in the Basic Paper
Specifications shown below, such as moisture or pulp content. For this reason, we recommend purchasing a small
amount of recycled paper as a sample for testing prior to use. Choose recycled paper that gives the best printing
results and contains low levels of paper dust.