TA Triumph-Adler P-C4580DN - Manual (Page 143)

6-19
Operation Panel
Y: Paper type can be set. N: Paper type cannot be set.
MP Tray Set. (MP tray settings)
To print correctly on paper supplied from the MP tray, use the procedure below to set the paper size and media type.
The options available in MP Tray Set. menu are as follows:
• Paper Size (Paper size setting for MP tray)...6-19
• Media Type (Paper type setting for MP tray)...6-21
Paper Size (Paper size setting for MP tray)
You can use this to set the paper size that can be supplied from the MP tray. The default setting is Letter size for the U.S.
and Canada and A4 for other countries.
For more information about the paper sizes that you can feed from the MP tray, refer to Paper on page A-9.
1
In the Paper Settings menu, press  or  to select MP Tray Set..
2
Press [OK]. The MP Tray Set. menu screen appears.
3
Press  or  to select Paper Size.
Cardstock (106 to 300 g/m
2
) Y N
Coated Y N
Thick (106 to 300 g/m
2
) Y Y*
HighQuality (60 to 163 g/m
2
) Y Y
CUSTOM# Y Y*
* Paper of weight up to 256 g/m
2
can be used in the paper cassette.
Note Feeding the paper having a paper size which does not match the current paper size from the MP tray can
cause paper jam.
Paper type (message display)
Paper Source
MP tray Cassette
MP Tray Set.:
a b
********************-
2 Media Type
[ Exit ]
1 Paper Size