TA Triumph-Adler P-C4580DN - Manual (Page 178)

Operation Panel
6-54
Data Encryption (Data Encryption setting)
This sets the encryption method.
1
In the Encryption menu, press  or  to select Data Encryption.
2
Press [OK]. The Data Encryption screen appears.
3
Press  or  to select the desired encryption method.
4
Press [OK]. The Encryption menu reappears.
WEP Key (WEP Key settings)
This registers the WEP Key.
1
In the Encryption menu, press
 or  to select WEP Key.
2
Press [OK]. The WEP Key screen appears.
3
Press[Edit] ([Right Select]). The WEP Key entry screen appears.
4
Enter the WEP Key using the numeric keys.
5
Press [OK]. The Encryption menu reappears.
Note The encryption methods that can be selected vary
depending on the authentication method set in Netwk
Authentic. (Network Authentication setting) on page 6-53.
Disable or WEP can be selected when Open or Shared is
set.
TKIP , AES or Auto can be selected when PA-PSK or WPA2-
PSK is set.
Data Encryption:
a b
********************-
2 *WEP 1 Disable
Note Up to 26 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-6.
WEP Key:
a b

[ Edit ]
WEP KEY:
a b
 *
ABC
[ Text ]