ProSoft Technology PTQ-104S - Manual (Page 11)

48TPTQ-104S Rev 1 ♦ 47TQuantum Platform Start Here
46TIEC 60870-5-104 Server for Quantum 12TUser Manual
1 Start Here
In This Chapter
 Hardware and Software Requirements ................................................. 12
 Install ProSoft Configuration Builder Software ....................................... 13
 Setting Up the ProTalk Module .............................................................. 14
Note: The PTQ-104S Rev1 manual is intended for v1.25.000 and older firmware. For v2.07.000
and newer firmware, please use the PTQ-104S Rev2 manual.
Verifying the firmware of the PTQ-104S module can be found on page 116.
This guide is intended to guide you through the ProTalk module setup process,
from removing the module from the box to exchanging data with the processor. In
doing this, you will learn how to:
 Set up the processor environment for the PTQ module
 View how the PTQ module exchanges data with the processor
 Edit and download configuration files from your PC to the PTQ module
 Monitor the operation of the PTQ module
ProSoft Technology, Inc. Page 11 of 201
March 4, 2013