ProSoft Technology PTQ-104S - Manual (Page 151)

48TPTQ-104S Rev 1 ♦ 47TQuantum Platform Reference
46TIEC 60870-5-104 Server for Quantum 12TUser Manual
The protocol specification defines a qualifier value that is set by the Master to
determine the duration of the pulse (short, long or persistent). Configure the
parameters below to set the duration of the short and long pulses:
C_RC_NA
A Step-Point Command point occupies one byte and uses byte addressing.
For example, if you configured the following points:
ProSoft Technology, Inc. Page 151 of 201
March 4, 2013