ProSoft Technology PTQ-104S - Manual (Page 84)

Module Configuration 48TPTQ-104S Rev 1 ♦ 47TQuantum Platform
12TUser Manual 46TIEC 60870-5-104 Server for Quantum
5.6.26 Scan Events
0 = N O S CANNING or 1 = S CAN FOR E VENTS
Separate parameters exist for multiple point types. Defines whether events of this
point type will be generated by the module. If set to zero (0) for N
O S CANNING ,
then events will not be generated. If set to S CAN FOR EVENTS , events will be
scanned and generated on data change.
Page 84 of 201 ProSoft Technology, Inc.
March 4, 2013