ProSoft Technology PTQ-104S - Manual (Page 142)

Reference 48TPTQ-104S Rev 1 ♦ 47TQuantum Platform
12TUser Manual 46TIEC 60870-5-104 Server for Quantum
This feature allows you to separate the points into different groups according to
the priority level that these should be reported to the Master. In the example
above, points 100 and 101 would be returned with a General Interrogation for
Group 1 and point 102 would be returned with a General Interrogation for Group
2.
Counter Points
There are four modes of acquisition of integrated totals (M_IT_NA points) defined
by the protocol specification. The actual values may be memorized (copied)
periodically to frozen values by a freeze command received from the master or
initiated locally within the module.
The gateway supports the following modes:
Mode A - Local freeze with spontaneous transmission
Mode D - Counter interrogation commands from the master initiate the freeze
operation and the frozen values are reported spontaneously.
Example - Mode A
To use Mode A, configure the following parameters:
Freeze Start Type
The Freeze Start Type parameter will define when the gateway starts sending
the M_IT messages.
Page 142 of 201 ProSoft Technology, Inc.
March 4, 2013