ProSoft Technology PTQ-104S - Manual (Page 26)

Configuring the Processor with Unity Pro 48TPTQ-104S Rev 1 ♦ 47TQuantum Platform
12TUser Manual 46TIEC 60870-5-104 Server for Quantum
After the build process is completed successfully, the next step is to download
the compiled project to the processor.
2.4 Connect Your PC to the Processor
The next step is to connect to the processor so that you can download the project
file. The processor uses this project file to communicate over the backplane to
modules identified in the project file.
Note: If you have never connected from the PC to your processor before, you must verify that the
necessary port drivers are installed and available to Unity Pro.
To verify address and driver settings in Unity Pro
1 Open the PLC menu, and choose S TANDARD M ODE . This action turns off the
PLC Simulator, and allows you to communicate directly with the Quantum or
Unity hardware.
2 Open the PLC menu, and choose S ET ADDRESS ... This action opens the Set
Address dialog box. Open the M EDIA dropdown list and choose the
connection type to use (TCPIP or USB).
Page 26 of 201 ProSoft Technology, Inc.
March 4, 2013