ProSoft Technology PTQ-104S - Manual (Page 67)

48TPTQ-104S Rev 1 ♦ 47TQuantum Platform Module Configuration
46TIEC 60870-5-104 Server for Quantum 12TUser Manual
Example 3:x or 4:x Register Transfer
The following example shows a typical command used to write to the 4:x
registers within the Quantum. In this example, registers 207 to 312 from the PTQ
will be transferred to registers 400208 to 400313 within the Quantum.
Example 0:x or 1:x Register Transfer
The transfer of Coils and Inputs require some forethought as the command
transfers words and not bits. This means that if you wanted to transfer the word
containing the bits 805 to 806 from the module to the Quantum you would
transfer the entire 50
th
word of the modules memory into the destination register
in the Quantum. The following command transfer bits 800 to 815 (Word x Bits =
Bit Address or 50 * 16 = 800) from the modules memory to word 1 of the coils
(000001 to 000016) within the Quantum.
Take care with the transfer of bits while planning the application so as to optimize
the usage of the available bits and to preserve the integrity of your information.
ProSoft Technology, Inc. Page 67 of 201
March 4, 2013