ProSoft Technology PTQ-104S User Manual
Page 35
Advertising
48TPTQ-104S Rev 1 ♦ 47TQuantum Platform
Configuring the Processor with Concept
46TIEC 60870-5-104 Server for Quantum
12TUser Manual
4 In the CPU/Executive pane, use the scroll bar to locate and select the PLC to
configure.
5 Click OK.
This action opens the PLC Configuration dialog box, populated with
the correct values that were selected for the PLC.
6 Make a note of the holding registers for the module. This information will be
needed when modifying the application. The Holding Registers are displayed
in the PLC Memory Partition pane of the
PLC Configuration
dialog box.
ProSoft Technology, Inc.
Page 35 of 201
March 4, 2013
Advertising