ProSoft Technology PTQ-104S - Manual (Page 90)

Module Configuration 48TPTQ-104S Rev 1 ♦ 47TQuantum Platform
12TUser Manual 46TIEC 60870-5-104 Server for Quantum
Type ID Point Database Description Range
M_BO_NA Monitored 32-bit Bitstring Data Point 0 to 1000
M_ME_NA Monitored Normalized Measured Point 0 to 1000
M_ME_NB Monitored Scaled Measured Point 0 to 1000
M_ME_NC Monitored Short Floating-Point Measured Point 0 to 50
M_IT_NA Monitored Integrated Total 0 to 99
C_SC_NA Command Single-Point 0 to 1000
C_DC_NA Command Double-Point 0 to 1000
C_RC_NA Command Step Point 0 to 1000
C_BO_NA Command 32-bit Bitstring Point 0 to 1000
C_SE_NA Command Normalized Set Point 0 to 1000
C_SE_NB Command Scaled Set Point 0 to 1000
C_SE_NC Command Short Floating-Point Set Point 0 to 50
5.8.6 Sequence Flag
Y ES or N O
In order to save bandwidth, you can configure the module to use the Sequence
Flag feature using the following parameters:
If this parameter is set to N O , this feature is not selected, the module will send
the object address and value for every monitored point sent to the Client, and the
Sequence Flag (SQ) will be set to zero (0).
Page 90 of 201 ProSoft Technology, Inc.
March 4, 2013