ProSoft Technology PTQ-104S - Manual (Page 154)

Reference 48TPTQ-104S Rev 1 ♦ 47TQuantum Platform
12TUser Manual 46TIEC 60870-5-104 Server for Quantum
For example, if you configured the following points:
The following table describes how these points would be stored in the module:
1300
Words 2600 and 2601 (Double-word address 1300)
500 Words 40 and 41 (Double-word address 20. Must
match the configuration of point 500 in M_ME_NC.)
1301 Words 2602 and 2603 (Double-word address 1301)
501 Words 64 and 65 (Double-word address 32. Must
match the configuration of point 501 in M_ME_NC.)
1302 Words 2620 and 2621 (Double-word address 1310)
502 Word 104 and 105 (Double-word address 52.Must
match the configuration of point 502 in M_ME_NC.)
9.2.5 Data Communication
Group Communication
The Group parameter in the module configuration file controls how each
monitored point is transferred between the PTQ-104S and the client unit. The
Group parameter is described in detail in Group Definition (page 98).
Page 154 of 201 ProSoft Technology, Inc.
March 4, 2013