ProSoft Technology PTQ-104S - Manual (Page 14)

Start Here 48TPTQ-104S Rev 1 ♦ 47TQuantum Platform
12TUser Manual 46TIEC 60870-5-104 Server for Quantum
4 Double-click the S ETUP C ONFIGURATION T OOL folder, double-click the
PCB_*. EXE file and follow the instructions on your screen to install the
software on your PC. The information represented by the "*" character in the
file name is the PCB version number and, therefore, subject to change as
new versions of PCB are released.
Note: Many of the configuration and maintenance procedures use files and other utilities on the
DVD. You may wish to copy the files from the Utilities folder on the DVD to a convenient location
on your hard drive.
1.3 Setting Up the ProTalk Module
After you complete the following procedures, the ProTalk module will actively be
transferring data bi-directionally with the processor.
1.3.1 Install the ProTalk Module in the Quantum Rack
Verify Jumper Settings
ProTalk modules are configured for RS-232 serial communications by default. To
use RS-422 or RS-485, you must change the jumpers.
The jumpers are located on the back of the module as shown in the following
illustration:
Page 14 of 201 ProSoft Technology, Inc.
March 4, 2013