NXP Semiconductors LPC24XX UM10237 - Manual (Page 316)

UM10237_4 © NXP B.V. 2009. All rights reserved.
User manual Rev. 04 — 26 August 2009 316 of 792
NXP Semiconductors
UM10237
Chapter 12: LPC24XX LCD controller
7.13 Upper Panel Current Address register (LCD_UPCURR, RW - 0xFFE1
002C)
The LCD_UPCURR register is Read-Only, and contains an approximate value of the
upper panel data DMA address when read.
Note: This register can change at any time and therefore can only be used as a rough
indication of display position.
The contents of the LCD_UPCURR register are described in Table 12–272 .
7.14 Lower Panel Current Address register (LCD_LPCURR, RW - 0xFFE1
0030)
The LCD_LPCURR register is Read-Only, and contains an approximate value of the lower
panel data DMA address when read.
Note: This register can change at any time and therefore can only be used as a rough
indication of display position.
The contents of the LCD_LPCURR are described in Table 12–273 .
7.15 Color Palette registers (LCD_PAL, RW - 0xFFE1 0200 to 0xFFE1 03FC)
The LCD_PAL register contain 256 palette entries organized as 128 locations of two
entries per word.
2 LNBUIC LCD next address base update interrupt clear.
Writing a 1 to this bit clears the LCD next address base update
interrupt.
0x0
1 FUFIC FIFO underflow interrupt clear.
Writing a 1 to this bit clears the FIFO underflow interrupt.
0x0
0 reserved Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined. -
Table 271. Interrupt Clear register (LCD_INTCLR, RW - 0xFFE1 0028)
Bits Function Description Reset
value
Table 272. Upper Panel Current Address register (LCD_UPCURR, RW - 0xFFE1 002C)
Bits Function Description Reset
value
31:0 LCDUPCURR LCD Upper Panel Current Address.
Contains the current LCD upper panel data DMA address.
0x0
Table 273. Lower Panel Current Address register (LCD_LPCURR, RW - 0xFFE1 0030)
Bits Function Description Reset
value
31:0 LCDLPCURR LCD Lower Panel Current Address.
Contains the current LCD lower panel data DMA address.
0x0