GE Industrial Solutions CPS6000-M2 - Manual (Page 105)

CPS6000-M2 Installation Guide H5694720
Issue 8 January 2008 105
Uninstall Devices
This feature is used to logically remove serial bus devices that have been physically removed and
an alarm generated to indicate this removal. Rectifiers and converters are the most common
devices that require this feature. 1-Wire devices are also considered serial bus devices.
Step Action
Note This feature uninstalls ALL devices that have been physically removed.
1 From the Default Screen, press the Menu button for the Main Menu.
2 Using the Up/Down Arrows, Scroll to Control/Operations and press Enter.
3 Select Uninstall Devices, and press Enter.
4 Press Enter again to Uninstall Devices, or Escape to return to the menus.
Troubleshooting QS-Series Rectifiers
The status of a QS-Series rectifier is provided by LEDs on the rectifier face, and by
extensive real time data, alarm and event history accessible through the system controller.