GE Industrial Solutions CPS6000-M2 - Manual (Page 85)

CPS6000-M2 Installation Guide H5694720
Issue 8 January 2008 85
3 Open the PC’s browser and enter the controller’s WIP as the destination address. This
address should be
http://192.168.2.1 . The Millennium II has HTTP capabilities and
should begin to return appropriate system representative web pages.
4 Using a standard browser, a login page similar to that depicted below should be served
up by the Millennium II controller. There are three levels of access through the port;
Read-Only, Read/Write, and Read/Write with password management privileges.
Passwords defaults for the Craft port as well as other remote access means default as
follows:
Access Default Password
User (Read-Only) lineage
Super-User (Read/Write) super-user
Administrator (Read/Write/Password Administration) administrator
These password defaults can be changed by a user of administrator privileges.
Login Web Page
After the controller has granted access through the port, the controller serves up a Home page
similar to that shown below. Front panel access and capabilities are a super-set of the functions
and features available through the Craft port. Configuration of individual parameters and features
can be performed by using the items located in the Settings tab or a general quick configuration
of the system can be performed through the Installation tab. The Home Page has tabs that are
partitioned as the following: