GE Industrial Solutions CPS6000-M2 - Manual (Page 64)

CPS6000-M2 Installation Guide H5694720
Issue 8 January 2008 64
Display Contrast In the Main Display, the ▲▼ buttons increase or decrease
the display contrast.
Parameter Change When changing a system parameter, the ▲▼ buttons
increase or decrease the value of the parameter.
Direction Buttons In the Menus, the ◄▲▼► direction buttons navigate to
make a selection
Enter Button Enters a sub-menu or confirms a parameter change. From
the Home Page only, goes to the top level Main menu.
Menu Button Goes to the top level Main menu.
ESC Button Goes up one menu level or exits a parameter change without
saving.
Help Button Shows a Help screen.
Lamp Test Initiates a Lamp Test operation.
Millennium II Main Display and Menus
Main Display The Main Display is the normal controller
display. The display will return to the Main
Display after a period of inactivity.
Top Level Menu The Main menu allows you to view your
equipment status in detail, history, and to view
and edit a variety of parameters.
Information Menus These Information menus give detailed
information regarding the status and history of
your plant.
Control / Operations Menu The Control / Operations menu allows you to
perform common operations on your plant.
Operations that are required to turn up and
verify your plant are detailed in the Installation
and Test and Verification sections of this
manual.