GE Industrial Solutions CPS6000-M2 User Manual
Page 87
CPS6000-M2 Installation Guide H5694720
Issue 8 January 2008
87
Maintenance Allows remote access to Control/Operation commands assessable through the front
panel. These include restarting rectifiers/ringers, starting alarm or battery tests, asserting
boost, clearing history and statistics, clearing latched events and missing equipment,
placing rectifiers/ringers in and out of Standby.
Note: The “Factory Defaults” button under system loads the default settings assigned to
a specific battery type as defined in the defaults configuration file. Presently this
function is unavailable since hard coded defaults are utilized and there is no default
configuration file.
Settings
Items in this menu are used to configure all the individual system parameters, features,
and thresholds. These fields are arranged by System, Reserve, Communication and
Programming.
Installation This tab allows a quick configuration of the primary items that need to be set for a site.
These items include selecting the battery type, date, time, and the site ID mentioned
during the front panel configuration start-up section.