GE Industrial Solutions CPS6000-M2 User Manual
Page 36
Advertising
CPS6000-M2 Installation Guide H5694720
Issue 8 January 2008
36
Typical Battery Installation on Trays with Battery Disconnect
Step
Action
1
Ensure disconnect switch is in
the OFF position (downward)
prior to making any
connections.
Remove the two 6/32 screws to
remove the plastic cover.
Does system have larger batteries?
Yes – Proceed to Step 2.
No – Go to Step 3.
2
Reposition the battery
disconnect switch to the
outside of the battery tray as
shown using (2) provided
901281444 Flathead 10-32 x
3/8” Phillip screws.
Advertising