GE Industrial Solutions CPS6000-M2 - Manual (Page 31)

CPS6000-M2 Installation Guide H5694720
Issue 8 January 2008 31
Anchoring Frame
Floor Mounted Frames
Using the 847135688 Floor Anchor Kit (recommended):
Anchor Type (Hilti) Wrench Hole Size Torque
(4) 12 mm Cap Bolts 19 mm
18mm
100mm deep
720 in·lbs
60 ft·lbs
81.6 N·m
Note: For systems with tray mounted batteries at sites requiring Seismic Zone 4 rating, (2)
847135688 kits are required to provide (8) floor anchors.
Note: If using Equivalent Floor Anchors, make sure the floor anchors are rated for this
application.
Step Action
1
Mark floor anchor locations, using the provided Floor Template.
G103 7ft Standard Frames
G104 7ft Heavy Duty Frames
2
Drill anchor holes.
Caution: Follow safe floor drilling procedures to prevent possible asbestos exposure.
3 Place frame and install floor anchors according to manufacturer requirements.