GE Industrial Solutions CPS6000-M2 User Manual
Page 133
CPS6000-M2 Installation Guide H5694720
Issue 8 January 2008
133
3. Change directory (cd) to the web directory by typing: cd web.
ftp> cd web
250 CWD command successful
4. Use the “put” command to copy the web pages to the controller.
ftp> put m2-pages.web
200 Port command okay
150 Opening data connection for STOR (192.168.2.1,1576)
5. Verify the transfer by a message displayed indicating a successful file transfer.
226 File sent OK
ftp: 917504 bytes sent in 2.31Seconds 396.50Kbytes/sec.
6. Type “bye” to exit the FTP session.
ftp> bye
221 Goodbye!
The controller should automatically reboot
The software can also be uploaded through the web pages. Login into through the web pages as
“administrator” and go to the “Installation” tab and use the easy to use “Upgrade Code” feature
button located at the bottom of the page. The sample screen is shown below.
Clicking the “Upgrade Code” button provides an interface to select which file is to be upgraded
as well as a tool to help select the location of the file to FTP. Following is a sample screen.
.