Teledyne LeCroy SAS Verification Test Descriptions User Manual
Page 146
Advertising
University of New Hampshire
InterOperability Laboratory
support for all speeds and SSC settings. The DUT is expected to transmit it's Phy
Capabilities Bits.
Observable Results
●
Verify that following the last ALIGN (1) primitive transmitted during SNW-2 by the
DUT, there is 500.00 µs of D.C. Idle transmitted by the DUT followed by a COMWAKE
signal.
Possible Problems
●
If the DUT does not support 3.0 Gbps signaling, then it will not participate in SNW-2. If
this is the case, an alternative method of timing the first COMWAKE signal during
SNW-3 will have to be found.
UNH-IOL
SAS 2.0 Speed Negotiation
10 of 49
Advertising