Canon imageCLASS MF7470 User Manual
Page 159
1
2
3
4
5
6
7
8
9
10
11
4-48
Previous
Back
Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Registering File Server Addresses
If Language Switch in Common Settings is set to [On], the Host
Name and File Path of the file server destination may not be
displayed correctly, so you may not be able to refer to them.
1.
Press (Additional Functions).
2.
Press [Address Book Settings] → [Register
Address] → [Register New Add].
If a password has been set for the Address Book, enter the password
using
–
(numeric keys), then press [OK] to enter the Address
Book Settings menu. (See “Setting a Password for the Address Book,”
on p. 8-16.)
The Register New Address screen appears.
3.
Press
[File].
4.
Press the Protocol drop-down list, then select
the desired protocol.
[FTP]: Select this protocol if you are sending documents to a
computer running Sun Solaris 2.6 or later, Mac OS X, Internet
Information Services 5.0 under Windows 2000 Server, Internet
Information Services 5.1 under Windows XP Professional, Internet
Information Services 6.0 under Windows 2003 Server, Internet
Information Services 7.0 under Windows Vista, or Red Hat Linux 7.2.
[Windows (SMB)]: Select this protocol if you are sending documents
to a computer running UNIX/Linux (Samba 2.2.8a or later) or
Windows 98/Me/2000/XP/Server 2003/Vista.
5.
Set [Host Name], [File Path], [User], and
[Password].
For instructions on specifying each of the settings for FTP and
Windows (SMB), see “Specifying a File Server (imageCLASS MF7480
Only),” on p. 4-24.
6.
Press
[Next].
7.
Enter a name for file server address (up to 16
characters), then press [OK].
The first character that you enter for the name is used for sorting the
address list when you press keys, such as [ABC] and [DEF], on the
Address Book screen.
8.
Press [Done] repeatedly until the Send Basic
Features screen appears.