Canon imageCLASS MF7470 - Manual (Page 38)

1
2
3
4
5
6
7
8
9
10
11
1-10
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Touch Panel Display
Most operations on this machine are executed from the touch
panel display. By pressing the keys according to the
instructions on the touch panel display, you can utilize the
functions of this machine efficiently.
Press the touch panel display keys gently with your fingers. Do not press
the touch panel display with a pencil, ballpoint pen, or other sharp objects
that can scratch the surface of the touch panel display. Doing so may
damage the touch panel display.
Before using the touch panel display, peel off the protective film from the
display.
Frequently Used Keys
The keys that are used frequently on the touch panel display are:
Press to cancel the mode that you are
currently setting, or a mode that has already
been set, on screens other than the Additional
Functions screen. Also, press to close the
current mode’s setting screen, and keep the
original settings set from the Additional
Functions screen.
Press to confirm the current settings and
proceed to the next step in the procedure.
Press to go back to the previous step in the
procedure, without saving the current
settings.
Press to close the current screen.
■
Press to confirm the current settings of a
mode.
Touch Panel Key Display
When you press a key on the touch panel display, that key is
highlighted, and the corresponding mode is set. When you set
certain modes, the characters on some keys may become grayed
out. You cannot press keys that are grayed out. This means that you
cannot set these modes in combination with the presently set
mode.
Mode Setting Keys
State of Keys Description
The 2-Page Separation mode is
not set, and can be selected.
(The key is highlighted)
The 2-Page Separation mode is
set, and can be selected.
(The characters on the key are
grayed out.)
The 2-Page Separation mode
cannot be set in combination
with the presently set mode.
■
●