Canon imageCLASS MF7470 - Manual (Page 76)

1
2
3
4
5
6
7
8
9
10
11
3-5
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Paper Selection
You can manually specify a paper size or set the machine to
automatically select the paper size for you.
If you are copying an original with an image that extends all the way to
the edges onto the same size paper at a copy ratio of 100%, the
periphery of the original image may be cut off slightly on the copy. For
more information on how much may be cut off, see “Scanning Area,” on
p. 2-4.
If you select [Envelope], [Transparency], or [Labels], make sure that you
do not specify any Finishing modes (Collate or Group).
If Stack Bypass Standard Settings in Common Settings (from the
Additional Functions screen) is set to [On], and the paper size/type have
been stored, the selected paper size/type are displayed on the screen.
(See “Stack Bypass Standard Settings,” on p. 11-7.)
Automatic Paper Selection
The machine automatically selects the copy paper size.
The Automatic Paper Selection mode is available only if the originals are
fed from the feeder.
The Automatic Paper Selection mode cannot be used with the Auto
Zoom or Image Combination mode.
You cannot use the Automatic Paper Selection mode when copying the
following types of originals. Copy these originals using the Manual Paper
Selection mode.
Nonstandard size originals
Highly transparent originals, such as transparencies
Originals with an extremely dark background
STMT or STMTR originals that are placed on the platen glass
If Drawer Eligibility For APS/ADS in Common Settings (from the
Additional Functions screen) is set to [Off ] for a particular paper source,
you cannot make copies on paper loaded in that paper source in the
Automatic Paper Selection mode. (See ”Drawer Eligibility For APS/ADS,”
on p. 11-6.)
–
–
–
■
–
–
–
–
–
–
–
–
1. Press (COPY).
2. Place your originals.
3. Press [Paper Select].
4. Press [Auto], then [Done].
When the feeder is closed, the paper source holding that paper size
is highlighted along with [Auto].
5.
Press (Start).