Canon imageCLASS MF7470 - Manual (Page 414)

1
2
3
4
5
6
7
8
9
10
11
11-31
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
System Settings
IPv6 Settings Sets IPv6 Address settings.
Use IPv6 Sets the use of IPv6 address.
Off
On –
–
Stateless Address Settings Sets the machine to obtain the IPv6 address automatically using the machine’s MAC address
and the prefix (information indicating the network belonged to) included in the RA (Router
Advertisement) notified by the router when the machine is started.
Off
On –
–
Manual Address Settings Sets whether to set a fixed IPv6 address to the machine.
Off A fixed IPv6 address is not set.
On Sets a fixed IPv6 address to the machine.
Manual Address Registers a fixed IPv6 address to the machine.
Prefix Length Sets the prefix length of the IPv6 address. (0-128)
Default Router Addr. Sets the default router address.
Use DHCPv6 Sets whether to use DHCPv6.
Off
On –
–
PING Command Checks the TCP/IPv6 network connection.
IPv6 Address Checks the network connection by specifying the IPv6 address.
Host Name Checks the network connection by specifying the host name.
IP Address Range Settings Sets whether to use the IP address filter function.
Off Disables the IP address filter.
On Enables the IP address filter.