Canon imageCLASS MF7470 - Manual (Page 87)

1
2
3
4
5
6
7
8
9
10
11
3-16
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
6. Select [A4], [A4R], [B5], [B5R], [LTR], or [LTRR],
then press [OK].
[Rotate] can be selected only in the following cases:
If the available paper size is selected manually
If the available paper size is loaded in both the horizontal and
vertical directions
The selected paper source must have Drawer Eligibility For
APS/ADS in Common Settings (from the Additional Functions
screen) set to [On]. (See “Drawer Eligibility For APS/ADS,” on
p. 11-6.)
When you have selected Automatic Paper Selection for the
Rotate mode, make sure to select a paper size which can be
rotated. Otherwise, output will not be rotated.
If there is no paper which can be rotated, output will be collated.
7. Press (Start).
If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display. Press (Start) once for each
original. When scanning is complete, press [Done].
To cancel this setting, press [Finishing], then [Cancel].
To cancel all settings and return the machine to the Standard
mode, press (Reset).
–
–
–
–
–
–
–
–