Lenze 8400 protec Manual - Manual (Page 23)

Product description
Type code
3
l
23 EDS84DPS424 EN 5.0
EMS version

E84D x x x x xxx x x x x x x x
Product range
Inverter Drives 8400 protec EMS
Special communication version for
monorail overhead conveyor applications
E = half wave
L = coded half wave
P = power wave
D = DECA bus
F = inductive system
Connection system for mains and 24−V supply of the
brake control in case of inductive systems
M = 2 hybrid plugs, type Q4/2
P = 1 hybrid plug, type Q4/2
Motor holding brake control
(with connection system for motor)
"Fast switch":
B = plug type Modular
Integrated half−wave brake rectifier:
K = plug type Q8/0
H = plug type Han 10E
24 V DC:
V = plug type Q8/0 (for version F only)
Series
for half wave version:
D = half wave 400 V AC / reference phase L1 // 24 V DC
internal
E = half wave 400 V AC / reference phase L3 // 24 V DC
internal
for coded half wave version:
F = half wave 230 V AC / reference phase L1 // 24V DC
internal
G = half wave 230 V AC / reference phase L3 // 24V DC
internal
for power wave version or DECA bus:
E = half wave 400 V AC / reference phase L3 // 24 V DC
internal
for inductive system version:
C = 24 V DC internal
Power, e.g.
152 = 15 x 10
2 W = 1.5 kW
Voltage class
4 = 400/500 V, 3/PE AC
Communication (fieldbus)
C = CANopen
Configuration of input and output range
1 = CANopen and analog input via M12 plug
5 = CANopen and SSI via M12 plug
Extension module
B = digital I/O, CAN, 2 x RS485
C = digital I/O, CAN, RS485, RS422
D = digital I/O, CAN, 2 x RS422
Drive−based safety
N = none