Rockwell Automation 1407-CGCM Combination Generator Control Module User Manual
Page 36
36
Rockwell Automation Publication 1407-UM001G-EN-P - April 2013
Chapter 2
Installation
ControlNet Network Port
Two ControlNet tap cables and channel labels are included with the
1407-CGCM unit.
You can use the mounting fasteners provided on the right-hand side of the unit
chassis to fasten the tap cables. Minimum bend radius for the ControlNet tap
cables is 38 mm (1.5 in.). Take care not to kink or pinch the ControlNet tap cable
or bend it more sharply than the minimum radius. Panduit HLM-15RO
hook-and-loop wraps are recommended for securing the tap cable to chassis
mounts.
Use the thumbwheel switches on the front of the CGCM unit to set the
ControlNet network node address (MAC ID).
For installation procedures, please refer to ControlNet Coax Media Planning and
Installation, publication
.