Rockwell Automation 1407-CGCM Combination Generator Control Module - Manual (Page 99)

Rockwell Automation Publication 1407-UM001G-EN-P - April 2013 99
CGCM Unit Configuration Chapter 4
Voltage Tab
The Voltage tab is used to configure the unit’s parameters related to the voltage
protection and compensation functions.
Over-voltage
• Setpoint - Establishes the over-voltage setpoint used by the CGCM unit.
This setpoint is stored in tag Ovr_V_Setpt in the configuration table and
scaled in per cent rated generator volts.
• Delay - Establishes the time the generator voltage must be above the
over-voltage setpoint before the CGCM unit annunciates an over-voltage
fault. This setpoint is stored in tag Ovr_V_TimeDly in the configuration
table and scaled in seconds.