Casio Naurtech CETerm Ver.5.5 User Manual - Manual (Page 119)

N AURTECH E MULATORS & W EB B ROWSER FOR W INDOWS CE / W INDOWS M OBILE
CETerm | CE3270 | CE5250 | CEVT220 Page 119
\t = Tab
\xDD = Hexadecimal value
Customize User Text
User Text is any arbitrary text that may be configured so that this does not have to be spell typed
using either the hardware keys or the soft input panel on the device. You can associate the user
text strings with the either software button keys on the Configurable Keybar or hardware keys.
User text strings can be any escaped text string, escape sequence or Naurtech ID action (IDA)
codes. Please refer to the ―User Text‖ section under Options configuration.
Text strings do not have to be created on the device. You can create a simple text file, copy this
file to the device an
d ―load‖ your text strings from this file. Each text entry should be on a
separate line. An example is shown below.
Text file
The user text entries are automatically assigned a numeric order value. This is for representation
only. This order numbering value is not part of the user text. Once configured the user text entries
are referenced as
Text n within CETerm configuration, where n is the assigned order number.
In our example above, text entry Text 4, within CETerm, will be associated with the text string
―Carriage return \r‖
You can also edit the text strings directly on the device.
Any text string
Can include numbers 672 #@
VT Escape seq \e[17~
Carriage return \r
Tab \t
IDA Code \IDA_F3\