Casio Naurtech CETerm Ver.5.5 User Manual - Manual (Page 34)

N AURTECH E MULATORS & W EB B ROWSER FOR W INDOWS CE / W INDOWS M OBILE
CETerm | CE3270 | CE5250 | CEVT220 Page 34
Configuration
This section describes various configuration parameters for host connections. All these
parameters are set using the configuration dialogs accessed from the
[Session]
[Configure] application menu. Except for "Connection" parameters, you can change or update
any parameters at any time, whether the host / browser session is connected or disconnected.
Every configuration setting is automatically saved to the last configured setting. All configuration
attributes are associated with the currently active session. Every session can have a different set
of configuration attributes.
NOTE: The positioning of some of the user interface widgets on the dialogs shown might
appear slightly different on your device. This is because Windows CE devices come in various
screen form factors and the placement of the user interface widgets is performed dynamically,
based upon the device screen dimensions and characteristics.
Connection
The table below shows the hierarchy of configuration settings for the Connection configuration
attributes. Each highlighted title represents a configuration dialog tab or a button.
Connection
Host Type
Host Address
Terminal Device
Telnet Port
Advanced
General IBM Options VT Options
Auto Connect IBM Codepage Answerback Message
Auto Reconnect Device / LU# Keyboard
Macro on Connect Error Row Send Mode
Confirm Disconnect Shift all Error Row content Compatibility
Confirm Exit (Connected) Suppress Auto Field Advance User Pref Sup.
Exit on Disconnect Suppress Backspace At End VT Extensions
Check Network on Connect 3270 EAB Multi-byte: Mode
Check Network on Resume VT Modes Multi-byte: Code Page
Check Network before Send Background Two Column DB Characters
Enable Socket Keep-alives Columns Extensions: Symbol TNVT
Network C1 Controls Extensions: Symbol CE VT
Network Check: Timeout Backspace Extensions: Telxon
Network Check: Host Enter Key
Network Check: Action Autowrap
Security Local Echo
SSL: Enable SSL
SSL: Perform Certificate Checks
SSH: Enable SSH
SSH:
Advanced