Casio Naurtech CETerm Ver.5.5 User Manual - Manual (Page 122)

N AURTECH E MULATORS & W EB B ROWSER FOR W INDOWS CE / W INDOWS M OBILE
CETerm | CE3270 | CE5250 | CEVT220 Page 122
PA1, PA2, PA3
The PA1 through PA3 keys communicate with the host application. Their use is defined by the
host application.
PF1 - PF24
The Program Function keys PF1 - PF24 communicate with the host application. Their use is
defined by the host application.
5250 Host key descriptions
ATTN
The Attention key interrupts the host application.
SYS_REQ
The System Request key gives context to the System Software such as the SSCP (System
Services Control Point)
CLEAR
The Clear key causes a CLEAR Attention Identifier key to be sent to the host and the host
responds according to the host application.
RESET
The Reset key resets the terminal. Depending upon the current state, it removes the host
application from a keyboard inhibit state, terminates the System Request functions and exits
terminal from insert mode.
ERASE INPUT
This key clears all unprotected input fields and moves the cursor to the beginning of the first
input field.
ERASE to END OF FIELD (EOF)
This key erases all data in an input field from the current cursor location to the end of the input
field
FIELD MINUS
This key causes the cursor to advance to the next field and a minus sign is inserted in the last
position of a signed numeric-only field.
FIELD PLUS
This key causes the cursor to exit an input field and insert null characters from the current cursor
location to the end of the field.
FIELD EXIT
This key behaves similar to the Field Plus key. It causes the cursor to exit an input field and insert
null characters from the current cursor location to the end of the field.
ROLL UP
The Roll Up key sends a request to the host computer to roll up the information on the display.