Casio Naurtech CETerm Ver.5.5 User Manual - Manual (Page 73)

N AURTECH E MULATORS & W EB B ROWSER FOR W INDOWS CE / W INDOWS M OBILE
CETerm | CE3270 | CE5250 | CEVT220 Page 73
COM Port: This is the serial communications port to which the printer is attached.
Choices depend on the device. Users may select from COM, IrDA, Bluetooth, None, or
one of the Virtual COM (VCOM0 - 9) ports. The default value varies with the hardware
device. The None value can be selected to act as a ―sink‖. Printing to the None device
will always succeed. For printing to an infrared printer, select IrDA port. If IrDA is
selected, all settings except Timeout are ignored. Use the VCOMx ports for custom
connections such as virtual Bluetooth ports.
Baud Rate: The baud rate at which the communication device operates. It varies from
110 to 256K bits per second. Default is 9600.
Data Bits: The number of bits in the bytes transmitted and received. Default is 8.
The number of bits in the bytes transmitted and received. Default is 8.
Parity: The parity scheme to be used to communicate with the printer device. Default is
"None".
Stop Bits: The number of stop bits to be used. Default is 1.
Timeout: The amount of time to wait prior to aborting a connection if the printer is not
responding.
DTR Control: The DTR (data-terminal-ready) flow control. Default is "Disable".
RTS Control: The RTS (request-to-send) flow control. Default is "Disable"
CTS Out: The CTS (clear-to-send) signal monitoring for output flow control. If box is
checked and CTS is turned off, output is suspended until CTS is asserted again.
DSR Out: The DSR (data-set-ready) signal monitoring for output flow control. If this
member is TRUE and DSR is turned off, output is suspended until DSR is asserted again
XOnOff Xmit: When checked, use XON/XOFF flow control during transmission.
XOnOff Recv: When checked, use XON/XOFF flow control during reception.
Bluetooth Discovery
This button triggers the automatic discovery of Bluetooth devices (printers). It requires the
COM Port setting under Serial Port configuration to be ―BT Printer‖ or ―BT COM‖. A list of
discovered Bluetooth devices is provided in a selection list. Select your Bluetooth printer from
the list.
Network Printer
Configuration settings for a network printer
Print Queue: This is the Windows print queue name or the hostname of a printer.