RIGOL DP832A - Manual (Page 112)

RIGOL Chapter 2 Command System
2-88 DP800 Programming Guide
[:SOURce[<n>]]:CURRent:PROTection:STATe
Syntax [:SOURce[<n>]]:CURRent:PROTection:STATe {ON|OFF}
[:SOURce[<n>]]:CURRent:PROTection:STATe?
Description Enable or disable the overcurrent protection (OCP) function of the specified
channel.
Query the status of the overcurrent protection (OCP) function of the specified
channel.
Parameter Name Type Range Default
[<n>] Integer 1|2|3 1
{ON|OFF} Bool ON|OFF OFF
Explanation  When the overcurrent protection function is enabled, the output turns off
automatically when the output current exceeds the overcurrent protection
value currently set. You can send the
[:SOURce[<n>]]:CURRent:PROTection:TRIPped? command to query whether
overcurrent protection occurred on the specified channel.
 When [:SOURce[<n>]] or [<n>] is omitted, the system sets the
corresponding parameter of the channel currently selected.
 You can also send the :OUTPut:OCP[:STATe] command to enable or disable the
OCP function of the specified channel.
 You can send the [:SOURce[<n>]]:CURRent:PROTection[:LEVel] command to
query the current OCP value of the specified channel.
Return Format The query returns ON or OFF.
Example :CURR:PROT:STAT ON /*Enable the OCP function of the current channel*/
:CURR:PROT:STAT? /*Query the status of the OCP function of the current
channel and the query returns ON*/
Related
Commands
[:SOURce[<n>]]:CURRent:PROTection:TRIPped?
:OUTPut:OCP[:STATe]
[:SOURce[<n>]]:CURRent:PROTection[:LEVel]