RIGOL DP832A - Manual (Page 88)

RIGOL Chapter 2 Command System
2-64 DP800 Programming Guide
:OUTPut:TIMEr
Syntax :OUTPut:TIMEr {P8V|P30V|N30V},<secnum>,<volt>,<curr>,<time>
:OUTPut:TIMEr? {P8V|P30V|N30V}
Description Set the specified group of timer parameters of the specified channel.
Query the first 5 groups of timer parameters (the group numbers are 0 to 4) of the
specified channel.
Parameter Name Type Range Default
{P8V|P30V|N30V} Discrete P8V|P30V|N30V None
<secnum> Integer 0 to 2047 None
<volt> Real
Voltage range of the
current channel
CH1/CH2: 1V
CH3: -1V
<curr> Real
Current range of the
current channel
1A
<time> Real 1s to 99999s 1s
Explanation  <secnum> is the group number of the specified group of timer parameters.
<volt>, <curr> and <time> are the voltage, current and time of this group of
timer parameters respectively and the units are V, A and s respectively.
 You can also send the :TIMEr:PARAmeter command to set or query the timer
parameters.
Return Format The query returns a string. The format of each group of timer parameters is
"number,voltage,current,time". Multiple groups of parameters are separated by ";".
Example :OUTP:TIME P8V,1,5,1,10 /*Set the timer parameters of group 1 of CH1 to 5V, 1A
and 10s*/
:OUTP:TIME? P8V /*Query the first 5 groups of timer parameters of CH1.
The query returns
0,1.000,1.0000,1;1,5.000,1.0000,10;2,1.000,1.0000,1
;3,1.000,1.0000,1;4,1.000,1.0000,1*/
Related
Command
:TIMEr:PARAmeter