RIGOL DP832A - Manual (Page 71)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-47
:MONItor:CURRent[:VALue]
Syntax :MONItor:CURRent[:VALue] {<value>|MINimum|MAXimum}
:MONItor:CURRent[:VALue]? [MINimum|MAXimum]
Description Set the current value of the monitor condition (the current channel).
Query the current value of the monitor condition (the current channel).
Parameter Name Type Range Default
<value> Real Refer to the "Explanation"
Explanation For multi-channel models, the range of <value> is from 0 to the maximum current
of the current channel and the default is 0.5*rated current of the current channel;
for single-channel model, the range of <value> is from 0 to the maximum current
of the current range and the default is 0.5*rated current of range 1.
Return Format The query returns the current of the monitor condition (the current channel), for
example, 4.0000.
Example :MONI:CURR 4 /*Set the current value of the monitor condition (the current
channel) to 4A*/
:MONI:CURR? /*Query the current value of the monitor condition (the current
channel) and the query returns 4.0000*/
Related
Command
:MONItor:CURRent:CONDition
:MONItor:POWER:CONDition
Syntax :MONItor:POWER:CONDition {<P|>P|NONE}
:MONItor:POWER:CONDition?
Description Set the power monitor condition of the monitor (the current channel).
Query the power monitor condition of the monitor (the current channel).
Parameter Name Type Range Default
{<P|>P|NONE} Discrete <P|>P|NONE NONE
Explanation  You can set the power monitor condition to "<P" (<power), ">P" (>power) or
"NONE". "NONE" indicates that the instrument will not monitor the power.
 The actual monitor condition is the logic combination of the voltage, current
and power.
 You can send the :MONItor:POWER[:VALue] command to set the power
monitor value.
Return Format The query returns the power monitor condition, for example, <P.
Example :MONI:POWER:COND <P /*Set the power monitor condition (the current
channel) to "<P"*/
:MONI:POWER:COND? /*Query the current power monitor condition and the
query returns <P*/
Related
Commands
:MONItor:POWER[:VALue]
:MONItor:CURRent:CONDition
:MONItor:CURRent[:VALue]
:MONItor:VOLTage:CONDition
:MONItor:VOLTage[:VALue]