Trigger:out[:enable, Trigger:out[:enable] -153 – RIGOL DP832A User Manual
Page 177
RIGOL
DP800 Programming Guide
2-153
:TRIGger:OUT[:ENABle]
Syntax
:TRIGger:OUT[:ENABle] [D0|D1|D2|D3,]{ON|OFF}
:TRIGger:OUT[:ENABle]? [D0|D1|D2|D3]
Description
Enable or disable the trigger output function of the specified data line.
Query the status of the trigger output function of the specified data line.
Parameter
Name
Type
Range
Default
[D0|D1|D2|D3]
Discrete
D0|D1|D2|D3
D0
{ON|OFF}
Bool
ON|OFF
OFF
Explanation
If [D0|D1|D2|D3] is omitted, the command enables or disables the trigger
output function of the data line currently selected.
When the trigger output function is enabled, the specified data line outputs the
specified level or square waveform according to the setting of the output signal
) when the output signal of the specified control source
) meets the trigger condition set
).
Return Format
The query returns Dn,ON or Dn,OFF; wherein, n=0, 1, 2 or 3.
Example
:TRIG:IN D1,ON /*Enable the trigger output function of D1*/
:TRIG:IN? D1 /*Query the status of the trigger output function of D1 and the
query returns D1,ON*/
Related
Commands
:TRIGger:OUT:SOURce
:TRIGger:OUT:CONDition
:TRIGger:OUT:SIGNal