RIGOL DP832A - Manual (Page 29)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-5
:ANALyzer:MEMory
Syntax :ANALyzer:MEMory {1|2|3|4|5|6|7|8|9|10}
Description Open the specified record file in the internal memory (C disk).
Parameter Name Type Range Default
{1|2|3|4|5|6|7|8|9|10} Discrete 1|2|3|4|5|6|7|8|9|10 None
Explanation  This command is only available when valid record file is stored in the specified
location.
 Parameters 1 to 10 represent the record files stored in the corresponding
locations of the internal memory respectively.
 You can only set the start time, end time, current time and analysis object as
well as execute the analysis operation when valid record file is currently
opened ( :ANALyzer:FILE? ).
Example :ANAL:MEMory 10 /*Open the record file currently stored in record file storage
location 10 in C disk*/
Related
Commands
:ANALyzer:FILE?
:ANALyzer:STARTTime
:ANALyzer:ENDTime
:ANALyzer:CURRTime
:ANALyzer:ANALyze
:ANALyzer:MMEMory
Syntax :ANALyzer:MMEMory <dest>
Description Open the record file in the specified directory in the external memory (D disk).
Parameter Name Type Range Default
<dest> ASCII string
Valid directory under D
disk
None
Explanation  This command is only available when external memory is detected and valid
record file is stored in the specified directory of the external memory.
 You can only set the start time, end time, current time and analysis object as
well as execute the analysis operation when valid record file is currently
opened ( :ANALyzer:FILE? ).
Example :ANAL:MMEMory D:\RECORD.ROF /*Open the RECORD.ROF file under D disk*/
Related
Commands
:ANALyzer:FILE?
:ANALyzer:STARTTime
:ANALyzer:ENDTime
:ANALyzer:CURRTime
:ANALyzer:ANALyze