RIGOL DP832A - Manual (Page 136)

RIGOL Chapter 2 Command System
2-112 DP800 Programming Guide
:SYSTem:COMMunicate:LAN:DNS
Syntax :SYSTem:COMMunicate:LAN:DNS <dns>
:SYSTem:COMMunicate:LAN:DNS?
Description Set the DNS (Domain Name Service) address.
Query the current DNS address.
Parameter Name Type Range Default
<dns> ASCII string Refer to the "Explanation" None
Explanation  This command is only available when the manual IP configuration mode is
enabled ( :SYSTem:COMMunicate:LAN:MANualip[:STATe] ).
 The format of <dns> is nnn.nnn.nnn.nnn; the first nnn ranges from 1 to 223
(except 127), the other three range from 0 to 255.
 You are recommended to ask your network administrator for an address
available.
 The new setting will only take into effect when
the :SYSTem:COMMunicate:LAN:APPLy command is executed to apply the
network parameter currently set after this command is send.
Return Format The query returns the DNS address, for example, 172.16.3.2.
Example :SYST:COMM:LAN:DNS 172.16.3.2 /*Set the DNS address to 172.16.3.2*/
:SYST:COMM:LAN:DNS? /*Query the current DNS address and the query
returns 172.16.3.2*/
Related
Commands
:SYSTem:COMMunicate:LAN:MANualip[:STATe]
:SYSTem:COMMunicate:LAN:APPLy