RIGOL DP832A - Manual (Page 81)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-57
:OUTPut:OCP:VALue
Syntax :OUTPut:OCP:VALue [CH1|CH2|CH3,]{<value>|MINimum|MAXimum}
:OUTPut:OCP:VALue? {CH1|CH2|CH3}[,MINimum|MAXimum]
:OUTPut:OCP:VALue? [MINimum|MAXimum]
Description Set the overcurrent protection value of the specified channel.
Query the overcurrent protection value of the specified channel.
Query the overcurrent protection value of the current channel.
Parameter Name Type Range Default
[CH1|CH2|CH3] Discrete CH1|CH2|CH3 None
<value> Real Refer to Table 2-2
{CH1|CH2|CH3} Discrete CH1|CH2|CH3 None
Explanation  When the overcurrent protection function is enabled, the output will turn off
automatically when the output current exceeds the overcurrent protection
value currently set. You can send the :OUTPut:OCP:ALAR?
or :OUTPut:OCP:QUES? command to query whether overcurrent protection
occurred on the specified channel currently.
 When [CH1|CH2|CH3] is omitted, the system performs the corresponding
operation on the current channel.
 You can also send the [:SOURce[<n>]]:CURRent:PROTection[:LEVel]
command to set the OCP value of the specified channel.
Return Format The query returns the overcurrent protection value, for example, 5.0000.
Example :OUTP:OCP:VAL CH1,5 /*Set the OCP value of CH1 to 5A*/
:OUTP:OCP:VAL? CH1 /*Query the OCP value of CH1 and the query returns
5.0000*/
Related
Commands
:OUTPut:OCP:ALAR?
:OUTPut:OCP:QUES?
[:SOURce[<n>]]:CURRent:PROTection[:LEVel]