RIGOL DP832A - Manual (Page 68)

RIGOL Chapter 2 Command System
2-44 DP800 Programming Guide
:MMEMory:STORe
Syntax :MMEMory:STORe <file_name>
Description Save the file with the specified filename under the current operation directory.
Parameter Name Type Range Default
<file_name> ASCII string Refer to the "Explanation" None
Explanation  This command is only applicable to external memory and is only valid when the
current directory is the external memory or a folder in the external memory.
 With this command, you can save the state file (RSF), timer file (RTF) and
delay file (RDF) under the current operation directory. <file_name> is the
name of the file to be created, including the name of the file (for example,
"STA" in STA.RSF) and file type (for example, "RSF" in STA.RSF). The filename
can contain up to 17 characters, including Chinese characters, English
characters or numbers (a Chinese character is counted as two characters).
 If a file with the same filename has been stored in the current operation
directory, this command is invalid (will not overwrite the original file directly).
 You can also send the :STORe:EXTErnal command to store the current
instrument state to the external memory.
Example :MMEM:STOR STB.RSF /*Save the current instrument state under the current
operation directory with the name STB.RSF*/
Related
Command
:STORe:EXTErnal