System:beeper:immediate, System:beeper[:state, System:brightness – RIGOL DP832A User Manual
Page 132: System:beeper:immediate -108, System:beeper[:state] -108, System:brightness -108
RIGOL
2-108
DP800 Programming Guide
:SYSTem:BEEPer:IMMediate
Syntax
:SYSTem:BEEPer:IMMediate
Description
Send this command and the beeper immediately sounds.
:SYSTem:BEEPer[:STATe]
Syntax
:SYSTem:BEEPer[:STATe] {ON|OFF}
:SYSTem:BEEPer[:STATe]?
Description
Enable or disable the beeper.
Query the status of the beeper.
Parameter
Name
Type
Range
Default
{ON|OFF}
Bool
ON|OFF
ON
Explanation
When the beeper is enabled, the instrument generates prompt sound when error
occurs during front panel operation or remote operation.
Return Format
The query returns ON or OFF.
Example
:SYST:BEEP ON /*Enable the beeper*/
:SYST:BEEP? /*Query the status of the beeper and the query returns ON*/
:SYSTem:BRIGhtness
Syntax
:SYSTem:BRIGhtness {<brightness>|MINimum|MAXimum}
:SYSTem:BRIGhtness? [{MINimum|MAXimum}]
Description
Set the brightness of the screen.
Query the brightness of the screen.
Parameter
Name
Type
Range
Default
<brightness>
Integer
1 to 100
50 (factory setting)
Return Format
The query returns an integer, for example, 60.
Example
:SYST:BRIG 60 /*Set the brightness of the screen to 60%*/
:SYST:BRIG? /*Query the brightness of the screen and the query returns 60*/